Why move from a single-stage blower to the e26?

The e26 is most useful to compare when your recurring job calls for a different machine architecture. A push single-stage blower and a self-propelled two-stage machine ask different things of the owner. With separate snow-handling stages and powered wheels, the e26 belongs on a shortlist for more substantial work, but it is not a promise that every dense bank or slope becomes easy.

Before choosing it, think about how you will turn at the end of the drive, reverse away from a garage, clear around parked vehicles and place the discharged snow. A broad route with room to maneuver can justify a larger machine. A short, constrained paved route may make a smaller design more practical. Use our snowblower type guide to separate those decisions from a brand preference.

The 26-inch opening and 20-inch intake need context

Toro publishes a 26-inch clearing width, a 20-inch intake and an up-to-45-foot throwing figure. Those are specifications and conditional marketing claims, not a Go Electric result. The intake height is not the same as a guarantee to clear a 20-inch wet drift at full width and full speed. A machine’s feed rate, snow density and discharge conditions still govern the work.

We would not turn the manufacturer’s car-space statement into an area guarantee for a different depth or a frozen plow mound. The e26’s worthwhile distinction is the two-stage layout and traction system. If the question is whether it materially changes your work compared with the 24-inch Toro e24, compare physical fit, complete kits and controls—not just the two extra inches of clearing width.

Two included batteries, three bays and a charger revision

The current operator manual for serial 418000000 and up identifies two 88675 7.5Ah packs and two 88605 rapid chargers in model 39926. Older e26 documentation identifies a different charger model, so use the manufacturer’s serial-range lookup for the unit being offered. That is why we do not assume every listing with the same short model name ships the same charging equipment.

There are three battery cavities, but only two packs are included in the reviewed kit. The optional third pack is a separate complete-cost question. Stay within Toro’s approved 60V system and follow the manual’s battery requirements; do not apply pack rules from an EGO or Greenworks machine. A third bay does not make this a 180V snow blower, and three physical bays do not automatically mean all are required to start.

Powered wheels and chute controls do not remove the fit check

The traction system and Quick Stick chute control are reasons to compare the machine’s operating layout. Ask a dealer to show the control reach, speed selection and how the machine turns at low speed before assuming it fits every user. Power assistance reduces one part of the job; balancing, maneuvering and choosing safe footing remain operator responsibilities.

The published model dimensions are useful for planning storage and access, but the stored handle/chute arrangement should be confirmed on the unit. Do not plan to carry a large two-stage machine up steps as though it were a compact snow thrower. Ask how delivery will reach the storage location, whether the assembled machine passes through the required opening and what clearance is needed for the charger setup.

Surfaces, safe clearing and maintenance still matter

Toro’s current manual includes housing-height adjustment for gravel or crushed rock. That makes the setup discussion different from the explicit no-gravel wording in the Greenworks SN60L522 manual. It does not make thrown stones harmless or replace a dealer discussion about the actual surface. Have the skids and scraper configured according to the manual and account for hidden obstacles, bystanders and discharge direction.

For a blockage, shut down, remove the key and battery packs, wait for movement to stop and use the approved cleanout approach—never reach into the chute by hand. Continue to inspect the traction controls, cables, scraper, skids and fasteners as directed. Eliminating fuel service does not eliminate mechanical wear or seasonal checks. The linked warranty is limited coverage, not a forecast of how long the machine will last.

Availability, dealer pricing and the alternatives to shortlist

At the October 11, 2026 check, Toro’s product page directed buyers to a local dealer rather than an online manufacturer checkout. We did not verify an exact current Amazon 39926 kit, so this review uses Toro’s dealer locator instead of a generic affiliate search link. Request an itemized quote including the serial-specific kit, assembly, delivery, tax and any extra batteries.

Compare the EGO SNT2807 if you are considering a larger EGO two-stage kit, and the Toro e24 if 24 inches may better fit the route or storage. For a manageable paved job without a need for powered wheels, the Greenworks 60V 22-inch kit is a different cost and ownership proposition. Buy the size and architecture you need, not the most elaborate machine a specification chart can display.

8 frequently asked questions